Handling the Hand Strap
A hand strap can be attached to the Handheld Printer Terminal.
Hook A
Release buttons | Hook B |
Hand Strap
Attach the hand strap following the procedure described below.
1.Attach Hook B of the hand strap to the hand strap hook located on the bottom of the Handheld Printer Terminal. (On models with a magnetic card reader, the hook is located at the bottom of the terminal on the back of the reader.)
2.Pull on the hand strap in the direction shown in the illustration, and then fasten Hook A onto hook ( 1 ) on the back of the Handheld Printer Terminal.
3.Fasten the wire of Hook A by inserting into the indentation in the Handheld Printer Terminal.
•Pull up on the center of the wire when unfastening.
•Press the left and right release buttons to separate the strap.
Important!
1 
* The illustration shows the
•When installing or removing the battery pack, always remove the hand strap first. Pulling on the hand strap with excessive force could cause damage.