5.Close the printer cover.

Turn the left and right lock switches from the "UNLOCK" position to the "LOCK" position to lock the printer cover.

Tear off the protruding roll paper.

1

2

2

<About the Splash Protect Cover>

•When you are using the IT-9000 outdoors in the rain or in similar situations, slide the splash protect cover fully closed.

•When closing the splash protect cover, ensure that it is fully closed to the position shown in the illustration. The cover is guaranteed to be splash-proof only when the cover is fully closed.

Open

Close

•The splash-proofing function is not guaranteed to work when the splash protect cover is closed with roll paper present outside the printer cover.

•When printing, slide the splash protect cover fully open.

Important!

•Always print with the roll paper properly installed. Printing without properly installing roll paper can damage the printer.

•If the roll paper should happen to become jammed in the printer, open the printer cover by following the procedure described in steps 1 and 3 of the procedure for “Installing the Roll Paper”, and then remove the jammed paper. Be careful not to touch the printer at this time since it may have become hot during the course of printing.

•If the end of the roll paper has become curled making it difficult to install the paper, first flatten out the paper by bending it back in the opposite direction before installing.

•The splash-proofing and impact protection functions are not guaranteed to work while the printer cover is unlocked. Always turn the lock switch to the "LOCK" position to lock the cover.

•Open the splash protect cover before opening or closing the printer cover. If you open or close the printer cover without first opening the splash protect cover, the splash-proofing is no longer guaranteed.

E-34