.To assign a priority level to pre-recorded face data

You can use the procedure below to assign names and priority levels to pre-recorded faces.

1.In the REC mode, press [SET].

2.Use [8] and [2] to select the fifth Control Panel option from the top (Face Recognition).

3. Use [4] and [6] to select “J Edit Family”

Face data editing screen

and then press [SET].

 

This will display the face data editing screen.

4.Use [8], [2], [4], and [6] to select the face data you want to edit, and then press [SET].

5.Use [4] and [6] to select a name, and then press [2].

6.Use [4] and [6] to select the priority level you want and then press [SET].

•You can set the priority to one of four levels: q (Disabled: no detection), and from s (Low) to v (High).

NOTE

•To delete pre-recorded face data, perform steps 1, 2, and 3 of the above procedure and then press [MENU]. You can use the menu to select one face data record or all face data records (page 34).

•Formatting the camera’s built-in memory (page 132) deletes all the recorded face data.

34

Snapshot Tutorial