Other Playback Functions (PLAY)
This section explains menu items that you can use to configure settings and perform other playback operations.
For information about menu operations, see page 56.
Playing a Slideshow on the Camera (Slideshow)
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * Slideshow
Start | Starts the slideshow | |
| Specifies the type of images to be included in the slideshow | |
| All images: Snapshots, movies, and audio recordings | |
Images | T Only: Snapshots and audio snapshots only | |
| » Only: Movies only | |
| One Image: One single selected image (selected using [4] and [6]) | |
|
| |
Time | Time from the start to the end of the slideshow | |
1 to 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes | ||
| ||
|
| |
| Amount of time each image remains displayed | |
| Use [4] and [6] to select a value from 1 to 30 seconds, or “MAX”. | |
| If you specify a value from 1 to 30 seconds, images change at the | |
Interval | specified interval, but the audio portion of movies and audio snapshots | |
will continue to play until the end. | ||
| ||
| When the slideshow reaches a movie file while “MAX” is selected, only | |
| the first frame of the movie will displayed. Voice Recording files are not | |
| played back when “MAX” is selected. |
Select the effect you want.
Pattern 1 to 5: Plays background music and applies an image change effect.
•Patterns 1 through 4 have different background music, but they all use the same image change effect.
•Pattern 5 can be used for playback of snapshots only, and the
Effect | “Interval” setting is ignored. | |
• The currently selected image change effect setting is disabled | ||
| ||
| automatically in following cases. | |
| – When playing a slideshow for which “» Only” or “One Image” is | |
| selected for the “Images” setting | |
| – When the interval setting is 1 second or 2 seconds. | |
| – Before and after playback of a movie or Voice Recording file | |
| Off: No image change effect or background music |
77Other Playback Functions (PLAY)