OTHER RECORDING FUNCTIONS

2.Wipe the surfaces of the battery with a soft, dry cloth, and then place it onto the battery holder so its positive , side is facing upwards (so you can see it).

Before Using the Card RemoteController for Recording

Be sure to perform the following steps before using the card remote controller for recording.

1.In the REC mode, use[] to select the card remote controller mode you want to use.

Remote controller operation enabled

3.Slide the battery holder back into the remote controller.

IMPORTANT!

Take care to ensure that the battery is not accidentally swallowed when it is removed from the remote controller. Particular care is required where young children are present.

Keep button battery out of the reach of small children. If swallowed accidentally, contact your physician immediately.

Enabling the card remote

controller for recording causes either “” or

“ ” to appear on the

2s

monitor screen.

: Pressing the remote controller’s shutter button immediately releases the shutter.

: Pressing the remote controller’s shutter button

2s

releases the shutter about two seconds later (same as the 2-second self-timer).

129