Casio K823PCM1DMX Specifying an Image for the Startup Screen, Use, [MENU], “Volume”, then press, then press [], To set the volume level, “Set Up” tab, select “Startup”, and

OTHER SETTINGS

To set the volume level	Specifying an Image for the Startup Screen
1. In the REC mode or the PLAY mode, press	You can specify an image you recorded as the startup
	screen image, which causes it to appear on the monitor
[MENU].
	screen for about two seconds whenever you turn on the
2. Select the “Set Up” tab, select “Sounds”, and	camera in the REC mode.
then press [].	1. In the REC mode or the PLAY mode, press
3.Use [] and][ to select“Volume”.
	[MENU].

4.Use [
] and][ to specify the volume setting2. Select the “Set Up” tab, select “Startup”, and

].you want, and then press [SET]. then press [

• You can set the volume in the range of 0 (no sound)	3.Use [] and][ to display the image yo
to 7 (loudest).
	to use as the startup image.
NOTE	4.Use [] and][ to change the setting,
• The initial default volume setting is 3.	then press [SET].
		To do this:	Select this setting:
		Use the currently displayed image	On
		as the startup screen image
		Disable the startup screen	Off

169