3. Click the [Setting] button.
Click the [Cancel] button to cancel the operation.
•Check that the serial port on the Macintosh to which the cable is connected is the same as the serial port (modem port or printer port) displayed in the configuration dialog box.
•Read the Macintosh instruction manual for details of the serial port on your Macintosh.
•If the serial port connected is different from the port in the configuration dialog box, select the serial port connected.
4.Click the [Test] button.
•When “The camera has been recognized.” dialog box is displayed, click the [OK] button and then click the [OK] button in the preferences dialog box.
•When an error message is displayed, the digital camera is not communicating correctly with Photo Loader. See Photo Loader 1.1 Help for dealing with this.
9