.Shooting at 1 to 7 Images Per Second with Flash
1.Set the mode dial to t (Auto).
2.Set the CS dial to ª (Flash CS).
3.Use [8] and [2] to select the second control panel option from the bottom (Flash CS fps).
4. Use [4] and [6] to select the continuous |
|
|
|
|
Flash Unit CS Speeds | ||||
shutter (CS) speed you want and then press |
|
|
|
|
[SET]. |
|
|
|
|
The flash unit fires when the CS speed is within the range of 1 to 7 fps.
•You also can change this setting using the control dial.
5.Use [8] and [2] to select the bottom item (Flash CS Images).
6.Use [4] and [6] to select the number of flash continuous shutter (CS) images you want to shoot and then press [SET].
You can select any one of the following values: 3, 5, 10, 15, or 20.
7.Press the shutter button to shoot.
8.If you keep the shutter button depressed, the camera will shoot the number of images you specified. Recording will stop if you release the shutter button before the specified number of images is reached.
9.Save the CS images (page 58).
NOTE
•When shooting with Flash CS, there may be times when a message appears telling you to wait, because you have reached the limit of the flash. This is to protect the flash from damage. You will be able to resume using flash after the message disappears.
49 | Snapshot Tutorial |
|