Shooting an Image in Accordance with Subject Movement (Move Out CS/Move In CS)
You can use these features to shoot an image automatically whenever the subject moves into or moves out of a frame on the monitor screen. You also can configure the camera to record images of what happened immediately before and after the subject moves.
| Automatically records what happened immediately before and | |
Move Out CS | after the subject moves outside of a boundary on the monitor | |
| screen. | |
Move In CS | Automatically records what happened immediately before and | |
after the subject moves into a boundary on the monitor screen. | ||
| ||
|
|
.To setup the camera
1.In the REC mode, set the mode dial to b.
2.Press [SET] and then select “Move Out CS” or “Move In CS”.
3.Use [8] and [2] to select the fourth control panel option from the bottom (æ Trigger Area Boudary), and then press [SET].
4.Configure the boundary location and size settings.
[8] [2] [4] [6] Moves the boundary.
Control Dial Resizes the boundary.
5. Press [SET]. | Boundary |
6.Use [8] and [2] to select the third control panel option from the bottom (Trigger Sense).
7.Use [4] and [6] to select the subject movement sensitivity, and then press [SET].
•You can select any one of three sensitivity levels: “High”, “Normal”, or “Low”.
•Move Out CS Setting Guide
High: For a subject that moves out of the boundary quickly
Low : For a subject that moves out of the boundary slowly
•Move In CS Setting Guide
High: For a subject that moves into the boundary quickly or for a small subject (relative to the boundary)
Low : For a subject that moves into the boundary slowly or for a large subject (relative to the boundary)
72 | Using BEST SHOT |
|