2.Use the H, J, K and L cursor keys to move the underlining to the sym- bol you want.
•Not all of the available symbols fit on the display. The menu will scroll when you press the cursor keys.
•In this example, underline #.
3. After you underline the symbol you want, press | IO# |
SET. | |
• This returns to the input screen, with the symbol | |
you selected input at the location where the cur- | |
sor was located when you displayed the symbol |
|
list. |
|
Part 4 Deleting and Inserting Characters
This section describes everything you need to know about deleting and editing characters you have already input.
Moving the Cursor
Use the cursor keys to move the cursor around the display and position it for deleting and editing characters.
To move the cursor
•Press Hto move the cursor to the left, and Jto move the cursor to the right.
•Press FUNCTION and then H to make the cursor jump to the beginning (far left) of the characters on the display.
•Press FUNCTION and then J to make the cursor jump to the end (far right) of the characters on the display.
•Holding down the H or J cursor key moves the cursor at high speed.
Deleting Individual Characters
You can delete individual characters with either the BS key or the DEL key (which is the Kcursor key). The only difference between the operation of these two keys is the location of the cursor.
To delete characters using the BS key
Example: To change the word “commmputer” to “computer”.
1. Use H and J to move the cursor under “p”.
pute
2.Press BS twice to delete the two m’s to the left of the cursor, shifting “puter” to the left as you do.
3.Press FUNCTION and then J to jump back to the end of the characters for more input.
To delete characters using the DEL key
Example: To change the word “commmputer” to “computer”.
1.Use H and J to move the cursor under the first (far left) “m”.
2.Press DEL twice to delete the two m’s at the cursor’s position, shifting “mputer” to the left as you do.
3.Press FUNCTION and then J to jump back to the end of the characters for more input.
Clearing the Display
Use the following procedure to clear all input text from the display.
To clear the display
Press FUNCTION and then BS (CLS).
At this time the message CLS? appears on the display to confirm that you want to clear the display. Press SET to clear or ESC to abort the operation without clearing anything.
Text Editing
You can use the following procedures to edit text on the display.
To insert new characters
Example: To change the text “ABCDEF” to “ABCXYZDEF”.
1.With the original text on the display, move the cursor under the letter “D”.