Casio KL-7200 Error Messages/Display Messages, ∙Using Labels, SET, ESC, SET, Page, E-23, Action, Action, ON/OFF, Message, Possible Causes, Possible Causes

∙Using Labels

Label will not adhere to a surface.

Possible Causes	Action	Page
The backing paper is still	Peel the backing paper from the back	E-16
on the back of the tape.	of the tape to expose the adhesive.
Surface is unsuitable for	Labels do not adhere well to surfaces	E-16
affixing a tape.	that are rough, wet, oily, or dirty.

Error Messages/Display Messages

Message	Possible Causes	Action
¥ ERROR!	∙ The number carriage	∙ Use wider tape or
	returns you input causes	reduce the number of
* This message
	the label to exceed the	lines.
appears on the	maximum number of lines	6mm tape...1 line
screen for about	for the tape you are	9mm tape...1 line
one second.	using.	12mm tape...Up to 2 lines
		18mm tape...Up to 3 lines
		24mm tape...Up to 3 lines
NO DATA	∙ You are attempting to
* This message	recall text from memory
	when there is none
appears on the
	stored.
screen for about
one second.
OVERWRITE?	∙ You are attempting to	∙ Press SET to overwrite
	store text in memory	the existing text with the
	when it already contains	new text, or ESC to
	text.	cancel the store
		operation.
No. ERROR!	∙ You pressed SET while a	∙ Press any key besides
	non-numeric character	ON/OFF and then
	was highlighted when	highlight a number.
	specifying the first digit for
	a sequential number.
TAPE ERROR!	∙ You are attempting to	∙ Use only 18mm tape to
	print a stamp using a tape	print a stamp.
	size other than 18mm.
	∙ You are attempting to	∙ Turn the power OFF and
	print a stamp without	set the tape cartridge.
	setting a tape cartridge.

E-23