Initializing the Label Printer
If you experience serious malfunction of the Label Printer or if operation fails completely, try performing the following operation to initialize the printer.
Important!
∙Initializing the Label Printer deletes all memory contents. Make sure you have a
To initialize the Label Printer
1.Turn power off.
2.While holding down the PRINT and ESC keys, press ON/OFF to turn power on.
3.Keeping PRINT and ESC held down, release the ON/OFF key only.
∙This prompt confirms whether or not you want to initialize the Label Printer. 4. Release ESC, and then PRINT.
I N I T I A L ?
5.Press SET to initialize the Label Printer or ESC to abort the reset operation. ∙ The following table shows the initial settings.
Item | Reset |
Display | Cleared |
Memory | Cleared |
Preset | PHRASE |
Phrases | REGISTERED |
SYMBOL | , |
SIZE | AUTO |
EFFECT | CANCEL |
STYLE | NORMAL |
NO | |
MIRROR | OFF |
MEMO | STORE |
DENSITY | 3 |
CONTRAST | Level 16 |
Troubleshooting
∙ Power Supply
Nothing appears on the display. |
| ||
Possible Causes | Action | Page | |
|
|
| |
Low batteries | Replace batteries. | ||
|
|
| |
Improper display contrast | Adjust display contrast. | ||
setting |
| ||
|
| ||
|
|
| |
Batteries loaded | Remove batteries and reload them | ||
incorrectly | correctly. | ||
| |||
|
|
| |
AC adaptor is not | Make sure the AC adaptor is | ||
connected correctly. | connected correctly. | ||
| |||
|
|
| |
∙ Text Input
Cannot input text.
Possible Causes | Action | Page | |
|
|
| |
FUNC key has been | Press ESC to clear FUNC key | ||
pressed. | operation. | ||
| |||
|
|
|