Casio KL-7200 ∙ Tape Cutting, Page, Page, Page, Page, Page, Page, E-22, Action, Action, Action, Action, Action, Action, Important, Important, FUNC FEED, Important

Tape does not come out when PRINT is pressed.

Possible Causes	Action	Page
Tape cartridge compart-	Securely close the cover.
ment cover is not closed		E-7
completely.
No more tape left in the	Replace the tape cartridge with a	E-7
cartridge.	new one.
Tape jam	Remove the tape cartridge and pull
	out the jammed tape by hand. Cut off
	excess tape with scissors, and
	carefully replace the cartridge into
	the Label Printer.	E-7
	Important!
	Never allow the tape outlet to
	become blocked and never touch
	tape as it is being fed during printing.

Tape comes out when PRINT is pressed, but nothing is printed on it.

Possible Causes	Action	Page
Only blank spaces were	Input the text you want to print.	E-9
input.
Printing is blurred, blotched, broken, etc.
Possible Causes	Action	Page
Improper print density	Adjust the print density setting.	E-17
setting
Improper loading of the	Remove the tape cartridge and	E-7
cartridge	reload it correctly.
Dirty printer head or	Clean the printer head and roller.	E-20
rubber roller

Ink ribbon is being fed from the tape outlet along with the tape.

Possible Causes	Action	Page
Ink ribbon cassette	Remove the ink ribbon cassette and
loaded while the ink	check to make sure the ink ribbon is
ribbon is slack.	not broken. Next, take up any slack
	in the ink ribbon and then reload the
	tape cartridge.

	Important!	E-7
	∙ Before loading an ink ribbon
	cassette into the Label Printer,
	always make sure you take up any
	slack in the ink ribbon first.
	∙ If the ink ribbon is broken, you
	must change to another ink ribbon
	cassette.
∙ Tape Cutting
	Cannot cut tape.
Possible Causes	Action	Page
Tape cutter blade is dull.	Take the label printer to the dealer
	from whom you purchased it to have	—
	the tape cutter blade replaced.
Printed text is cut off by tape cut operation.
Possible Causes	Action	Page
The printer is set up for	Be sure to press the FUNC FEED key
manual tape feed.	before performing the tape cut
	operation.	E-17
	Important!
	When the printer is set up for manual
	tape feed, the tape is not fed automati-
	cally after printing is complete.
Out of tape	Replace the tape cartridge with a new	E-7
	one.

E-22