Casio LK-220 Starting a Sampling Operation Manually, Turning off power clears sampled data, setting, English, start if you keep 5 depressed, ■How sampled sounds are played

		Controlling the Keyboard Sounds
5. Output the sound from the microphone.		Starting a Sampling Operation Manually
The Digital Keyboard will start sampling automatically,
	1. Press 4 a number of times until “SmplAuto”
and stop after one second.
What you sample is stored as tone number 401.		appears on the display (page E-4).
Flashes

					S m p l A u t o
		S a m p l i n g
				2. Press the bo (10-key) [–] key to select the OFF
			Lights
				setting.
				This enables manual sampling. When this setting is
				selected, sampling will not start until you press 5.
		O r i g i n a l
	• When the above setting is “oFF”, sampling starts when
6. Try playing something on the keyboard.				you release 5, not when you press it. Sampling will not
				start if you keep 5 depressed.
• Sampling will not start if the volume of the sound picked up
	by the microphone is too low.
• A new sample replaces sample data currently stored as
	tone number 401. The old data is deleted.
	Turning off power clears sampled data!

Turning off power will cause any sampled sound data on the keyboard to be deleted.

■How sampled sounds are played

Pressing Middle C (C4) will play back the original sound. The keys to the left and right of C4 play the sound at different pitches.

C4

English

E-13