Casio LK-270 Using Reverb, Using Chorus, To change the split point, 1 to, English, Off (oFF), reverb setting you want, Controlling the Keyboard Sounds

	Controlling the Keyboard Sounds
5. Pressing cp again to unsplit the keyboard (so it
	Using Reverb
plays only the tone you selected in step 1).
• Each press of cp toggles between split (two tones) and	Reverb adds reverberation to notes. You can change the
unsplit (one tone).	duration of the reverb.

1. Press ct and then use the bs (10-key) [4] ( ) and [6] ( ) keys to display “Reverb” (page E-6).

		Disappears		R e v e r b
			2. Use the bs (10-key) [–] and [+] keys to select the
• If you turn on both layer and split, layering will be applied to
	the right side range of the keyboard only.
			reverb setting you want.
	To change the split point
			Off (oFF)		Turns off reverb.
1. While holding down cp, press the keyboard key			1 to 10		The larger the number selected, the longer
	where you want the split point to be.				the reverb duration.
	The key you press will become the lowest note of the right				Indicator disappears when reverb is turned off.

side range of the split keyboard.

Example: Setting middle C (C4) as the split point.

English

C 4

R e v e r b

Key name

Using Chorus

Chorus is a function that adds depth and breadth to notes. It makes you sound as if you are playing multiple instruments.

1. Press ct and then use the bs (10-key) [4] ( ) and [6] ( ) keys to display “Chorus” (page E-6).

C h o r u s

2. Use the bs (10-key) [–] and [+] keys to select the chorus type you want.

There are five chorus types, plus an off setting.

Indicator disappears when chorus is turned off.

C h o r u s

• The actual effect produced by chorus depends on the tone you are using.

E-15