Casio LK70S Reading a SmartMedia card, to select, 1 Press the CARD button, ■ To play back SMF data, Press the SCORING button, ■To sing along with SMF data

Using a SmartMedia Card

Reading a SmartMedia card		■ To use SMF data in a 3-Step Lesson
NOTE		3-1	Press the STEP 1, STEP 2, or STEP 3 button.
• SMF data is converted to a format that can be played by
	this keyboard, and then stored in keyboard memory.		• If an error message appears, see “SmartMedia Card
	Whether or not the data can fit in keyboard memory		Error Messages” on page E-43 for information
	depends on the size of the converted data.		about what you need to do.
			• The channel specified as the navigate channel is
			assigned to the right-hand part, while the channel
1 Press the CARD button.			that is one less than the channel specified as the
			navigate channel is assigned to the left-hand part.
2 Use the number buttons to input the two-digit			• Voice Fingering Guide and on-screen fingering
			indicators are not supported for SMF data.
	number that corresponds to the SMF data you want
	to select.	■ To evaluate your play using SMF Data
	• Use the [+] and [–] buttons to input a data number	3-1	Press the SCORING button.
	that has more than two digits.
3 Perform one of the following operations.			• If an error message appears, see “SmartMedia Card
			Error Messages” on page E-43 for information
			about what you need to do.
IMPORTANT!			• The channel specified as the navigate channel is
All of the following points apply whenever you perform			assigned to the right-hand part, while the channel
			that is one less than the channel specified as the
any one of the operations described below.
			navigate channel is assigned to the left-hand part.
•	If there is no data currently stored in User Song areas
			• On-screen fingering indicators are not supported
	60 through 64, the applicable SMF data will be loaded
			for SMF data.
	automatically into User Song area 60 of the keyboard’s
	SONG BANK. After that, the keyboard will enter the Song	4 Press the START/STOP button to stop SMF data play.
	Bank mode automatically, select area 60, and start
	playback.
•	If there is data already stored in User Areas 60 through
	64, a confirmation message will appear asking if you
	want to replace all of the existing data. The existing data
	must be deleted in order to load the SMF data.
•	To delete the data, press the [+] button. This will delete
	the data, automatically enter the Song Bank Mode, and
	start playback of the data.
•	To cancel the delete operation, press the [–] button.
■ To play back SMF data

3-1Press the START/STOP button.

•If an error message appears, see “SmartMedia Card Error Messages” on page E-43 for information about what you need to do.

■To sing along with SMF data3-1Press the PLAY/STOP button.

•If an error message appears, see “SmartMedia Card Error Messages” on page E-43 for information about what you need to do.

•Playback volume is lower for SMF data part that is assigned to Channel 4.

E-42		653A-E-044B
LK70S_e_32-44.p65	42	04.8.18, 11:04 AM