Safety Precautions

Connectors

Connect only the specified devices and equipment to the product’s connectors. Connection of a non-specified device or equipment creates the risk of fire and electric shock.

Location

Avoid the following locations for this product. Such locations create the risk of fire and electric shock.

•Areas subject to high humidity or large amounts of dust.•In food preparation areas or other areas subject to oil smoke.

•Near air conditioning equipment, on a heated carpet, in areas exposed to direct sunlight, inside of a vehicle parked in the sun, or any other area that subjects the product to high temperatures.

Display Screen

•Never push on the display screen’s LCD panel or subject it to strong impact. Doing so can cause the LCD panel’s glass to crack, creating the risk of personal injury.

•Should the LCD panel ever crack or break, never touch the liquid inside of the panel. LCD panel liquid can cause skin irritation.

•Should LCD panel liquid ever get inside your mouth, immediately wash out your mouth with water and contact your physician.

•Should LCD panel liquid ever get into your eyes or onto your skin, rinse with clear water for at least 15 minutes, and then contact a physician.

Sound Volume

Do not listen to music at very loud volumes for long periods. Particular care concerning this precaution is required when using headphones. High volume settings can damage your hearing.

Health Precaution

In extremely rare cases, exposure to strong sudden light or flashing light can cause momentary muscle spasms, loss of consciousness, or other physical problems with some individuals.

•If you suspect that you might be susceptible to any condition such as this, be sure to consult with your physician before using this product.

•Use this product in an area that is well illuminated.

•Should you ever feel any symptoms similar to those described above when using this product, stop using it immediately and contact your physician.

Heavy ObjectsNever place heavy object on top of the product.

Doing so can make the product top heavy, causing the product to tip over or the object to fall from it, creating the risk of personal injury.

Correct Stand* Assembly

An incorrectly assembled stand can tip over, causing the product to fall and creating the risk of personal injury.

Make sure you assemble the stand correctly, following the assembly instructions that come with it. Make sure you mount the product on the stand correctly.

*Stand is available as an option.IMPORTANT!

When using batteries, be sure to replace them or shift to one of the alternate power sources whenever you notice any of the following symptoms.

•Dim power supply indicator

•Instrument does not turn on

•Dim, difficult to read display

•Abnormally low speaker/headphone volume

•Distortion of sound output

•Occasional interruption of sound when playing at high volumes

•Sudden power failure when playing at high volumes

•Dimming of the display when playing at high volume

•Continued sound output even after you release a key

•A totally different tone may sound

•Abnormal rhythm pattern and demo tune play

•Abnormally low microphone volume

•Distortion of microphone input

•Dim power supply indicator when a microphone is used

•Sudden power failure when using the microphone

•Dimming of keyboard lights when notes sound

•Loss of power, sound distortion, or low volume when playing from a connected computer

E-4

 

653A-E-006A

LK70S_e_01-07.p65

4

04.8.18, 11:03 AM