Operation Guide 5060
NovDecJan | |
Oct | Feb |
Sep | Mar |
Aug | Apr |
Jul Jun | May |
Setting the month
Note
5.Use Dto move the x Second Hand to the month setting you want.
6.After the month setting is the way you want, press
C.
••The watch will beep and change to the day setting mode.
7.Use D(+) and
••If you want to change the time setting at this time, press Cand then perform the procedure starting from step 3 under “To change the current time setting manually”.
8.After the settings are the way you want, press Ato return to the Timekeeping Mode.
••This will cause the x Second Hand to move automatically to 12 o’clock and resume movement from there.
••The day of the week indicated by the v Left Dial Hand changes automatically in accordance with the date (year, month, and day).
To specify the countdown start time
1.Use Cto move the v Left Dial Hand to TMR.
2.After confirming that the x Second Hand is stopped (which indicates there is no ongoing countdown timer operation), press D.
••If the x Second Hand is moving, press Bto stop it and then press D.
3.Use D(+) and
••Each press of either button will move the n Right Dial Hands one minute.
••Holding down Dor Awill start
••The maximum countdown start time setting is 24 hours. To set a countdown start time of 24 hours, move the n Right Dial Hands to 24.
To perform a countdown timer operation |
|
|
| |||||
B |
| B |
| B |
| B |
| D |
Start | Stop | (Restart) | (Stop) | Reset |
••Before starting a countdown timer operation, check to make sure that the countdown timer is not already operating (indicated by a moving x Second Hand). If it is, press Bto stop it and then Dto reset to the countdown start time.
••An alarm sounds for 10 seconds when the end of the countdown is reached. This alarm will sound in all modes.
••While a countdown operation is in progress, the x Second Hand and n Right Dial Hands move counterclockwise. When the end of a countdown is reached, the x Second Hand and n Right Dial Hands change direction and start moving clockwise
••The watch’s
Using the Stopwatch
The stopwatch measures elapsed time and split times.
Hand Functions
x Second Hand: Indicates the stopwatch seconds count.
v Left Dial Hand: Indicates the stopwatch
n Right Dial Hands: Indicate the stopwatch hours and
minutes. | |
|
to measure elapsed time after the end of the countdown. The elapsed time operation continues until you press Bto stop it.
••The maximum time measured by the elapsed time operation that starts after a countdown is complete is 23 hours, 59 minutes, 59 seconds.
To stop the alarm
Press any button.
Note
••Pressing any button while the alarm is sounding simply stops the alarm sound. It does not stop the elapsed time operation that started when the end of the countdown was reached. To stop the elapsed time operation, press B.
Checking the Current Time in a Different Time Zone
You can use the World Time Mode to view the current time in one of 29 time zones around the globe. The city that is currently selected in the World Time Mode is called
To perform elapsed time measurement
1.Use Cto move the v Left Dial Hand to ST.
2.Now you can perform either of following stopwatch operations.
To perform an elapsed time operation
B |
| B |
| B |
| B |
| D |
Start | Stop | (Restart) | (Stop) | Reset | ||||
To pause at a split time |
|
|
|
|
|
the “World Time City”.
Hand Functions
xSecond Hand:
Indicates the currently selected World Time City.
vLeft Dial Hand:
Indicates the current STD (standard time) or DST (daylight saving time) setting of the currently selected time zone.
nRight Dial Hands:
Indicate the current time in the selected World Time City in
B |
|
| D |
|
| Normal stopwatch hand movement will |
| B |
|
| D |
Start |
| Split |
| resume automatically after five seconds. |
| Stop |
| Reset | |||
|
|
|
|
|
Note
••The Stopwatch Mode can indicate elapsed time up to 23 hours, 59 minutes, 59.95 seconds.
••Dbutton operation (split, reset) is disabled while hands are moving at high speed following a reset operation and when transitioning from a split time back to normal elapsed timekeeping.
••Once started, stopwatch timing continues until you press Bto stop it, even if you exit the Stopwatch Mode to another mode and even if timing reaches the stopwatch limit defined above.
••You can press Bto start an elapsed time operation immediately after entering the Stopwatch Mode, even if the watch’s hands are still moving to their initial Stopwatch Mode positions. Note, however, that if the stopwatch was not reset after the last
To view the time in another time zone
1.Use Cto move the v Left Dial Hand to STD or DST.
••The x Second Hand will move to the city code of the currently selected World Time City.
2.Use Dto move the x Second Hand to the city code you want to select as the World Time City.
••The n Right Dial Hands will move to the current time in the time zone of the current city code. At this time, the z Hour Hand and c Minute Hand will continue to indicate the current time in the Home City.
••For full information on city codes, see the “City Code Table”.
••If you think that the time indicated for the selected time zone is not correct, it probably means that there is something wrong with your Home City settings. Use the procedure under “To configure Home City settings” to correct the Home City settings.
To specify standard time or daylight saving time (DST) for a city
elapsed time operation, timing will restart from where it was last stopped, and not from 0.
••The v Left Dial Hand indicates the
Using the Countdown Timer
The countdown timer can be configured to start automatically at a preset time, and sound an alarm when the end of the countdown is reached.
Hand Functions
x Second Hand: |
Moves |
Automatically switches to clockwise movement after |
the end of the countdown is reached to count up the |
Hold down Afor two seconds
1.In the World Time Mode, use Dto select the city code whose setting you want to change.
••Wait until the n Right Dial Hands complete their move to the time in the currently selected World Time City. You will not be able to perform step 2 of this procedure until the hands stop moving.
2.Hold down Afor about two seconds until the watch beeps. This will cause the v Left Dial Hand to toggle between DST (daylight saving time) and STD (standard time).
••Note that you cannot switch between STD (standard time)/DST (daylight saving time) while UTC is selected as the World Time City.
••Note that the STD (standard time)/DST (daylight saving time) setting affects only the currently selected time zone. Other time zones are not affected.
seconds of the elapsed time operation. |
v Left Dial Hand: Points to TMR. | |
n Right Dial Hands: | |
| |
| Move |
| minutes. Automatically switch to clockwise movement |
| after the end of the countdown is reached to count up |
| the hours and minutes of the elapsed time operation. |
Swapping your Home City and World Time City
You can use the procedure below to swap your Home City and World Time City. This capability can come in handy when you frequently travel between two locations in different time zones.
The following example shows what happens when the
Home City and World Time City are swapped while the
Home City originally is TYO (Tokyo) and the World Time City is NYC (New York).
|
| Home City | World Time City |
Before swapping | TYO | NYC | |
|
|
| |
After swapping | NYC | TYO | |
|
4