Operation Guide 5060
■■The x Second Hand indicates NO (N) when I check the result of the latest receive operation.
Possible Cause | Remedy | |
••You are wearing or moving the |
| |
watch, or performing a button | Keep the watch in an area where reception | |
operation during the signal receive | ||
conditions are good while the signal receive | ||
operation. | ||
operation is performed. | ||
••The watch is in an area with poor | ||
| ||
reception conditions. |
| |
You are in an area where signal |
| |
reception is not possible for some | See “Approximate Reception Ranges”. | |
reason. |
| |
| ••Check the website of the organization that | |
The calibration signal is not being | maintains the time calibration signal in your area | |
transmitted for some reason. | for information about its down times. | |
| ••Try again later. | |
|
|
■■The current time setting changes after I set it manually.
You may have the watch configured for Auto Receive of the time calibration signal, which will cause the time to be adjusted automatically according to your currently selected Home City. If this results in the wrong time setting, check your Home City setting and correct it, if necessary.
■■The current time setting is off by one hour.
Possible Cause | Remedy |
| Perform the operation under “To get ready for a |
Signal reception on a day for | receive operation”. The time setting will be adjusted |
automatically as soon as signal reception is | |
switching between STD (standard | successful. |
time)/DST (daylight saving time) may | |
have failed for some reason. | If you are unable to receive the time calibration |
| signal, change the STD (standard time)/DST |
| (daylight saving time) setting manually. |
■■Auto Receive is not performed or I cannot perform Manual Receive.
Possible Cause | Remedy | |
| Auto Receive is not performed while the watch is | |
The watch is in the Stopwatch Mode | in the Stopwatch Mode or Countdown Timer Mode. | |
or Countdown Timer Mode. | Hold down Cfor about two seconds to enter the | |
| Timekeeping Mode. | |
Your Home City setting is wrong. | Check your Home City setting and correct it, if | |
necessary. | ||
| ||
| Both Auto Receive and Manual Receive are | |
A countdown timer operation is in | impossible while a countdown is in progress. In the | |
progress. | Countdown Timer Mode, stop the timer operation | |
| and then return to the Timekeeping Mode. | |
There is not enough power for signal | Expose the watch to light to charge it. | |
reception. | ||
|
■■Signal reception is being performed successfully, but the time and/or day is wrong.
Possible Cause | Remedy | |
Your Home City setting is wrong. | Check your Home City setting and correct it, if | |
necessary. | ||
|
The watch may have been exposed
to magnetism or strong impact, which Adjust the watch’s hand and day home position
has caused problems with proper alignment. hand and day alignment.
Specifications
Accuracy at normal temperature: ± 15 seconds a month (with no signal calibration)
Timekeeping: Hour, minutes (hand moves every 10 seconds), seconds,
Calendar system: Full
Other: Home City code (can be assigned one of 29 city codes and Coordinated Universal Time); Daylight Saving Time (summer time) / Standard Time
Time Calibration Signal Reception: Auto receive up to six times a day (5 times a day for the Chinese calibration signal; Remaining auto receives cancelled as soon as one is successful); Manual receive
Receivable Time Calibration Signals:
Mainflingen, Germany (Call Sign: DCF77, Frequency: 77.5 kHz);
Anthorn, England (Call Sign: MSF, Frequency: 60.0 kHz); Fukushima,
Japan (Call Sign: JJY, Frequency: 40.0 kHz); Fukuoka/Saga, Japan
(Call Sign: JJY, Frequency: 60.0 kHz); Fort Collins, Colorado, the
United States (Call Sign: WWVB, Frequency: 60.0 kHz); Shangqiu City,
Henan Province, China (Call Sign: BPC, Frequency: 68.5 kHz)
Stopwatch: Measuring capacity: 23:59'59.95" Measuring unit: 1/20 second Measuring mode: Elapsed time, split time
Countdown Timer: Measuring unit: 1 second
Input range: 1 minute to 24 hours
Other: Auto switching to elapsed time measurement
World Time: 29 cities (29 time zones) and Coordinated Universal Time
Other: Standard Time/Daylight Saving Time (summer time); Home City/World Time City swapping
Alarm: Daily alarm
Other: Power Saving
Power Supply: Solar cell and one rechargeable battery
Approximate battery operating time: 5 months (no exposure to light after a full charge; 10 seconds alarm beeper operation and one signal reception of approximately 4 minutes per day)
City Code Table
City | City | UTC Offset/ |
| City | City | UTC Offset/ |
Code | GMT Differential |
| Code | GMT Differential | ||
|
|
| ||||
PPG | Pago Pago |
| JED | Jeddah | +3 | |
HNL | Honolulu |
| THR | Tehran | +3.5 | |
ANC | Anchorage |
| DXB | Dubai | +4 | |
LAX | Los Angeles |
| KBL | Kabul | +4.5 | |
DEN | Denver |
| KHI | Karachi | +5 | |
CHI | Chicago |
| DEL | Delhi | +5.5 | |
NYC | New York |
| DAC | Dhaka | +6 | |
SCL | Santiago |
| RGN | Yangon | +6.5 | |
RIO | Rio De Janeiro |
| BKK | Bangkok | +7 | |
FEN | Fernando de Noronha |
| HKG | Hong Kong | +8 | |
RAI | Praia |
| TYO | Tokyo | +9 | |
UTC |
| 0 |
| ADL | Adelaide | +9.5 |
LON | London |
| SYD | Sydney | +10 | |
|
| |||||
PAR | Paris | +1 |
| NOU | Noumea | +11 |
ATH | Athens | +2 |
| WLG | Wellington | +12 |
••Based on data as of June 2008.
••The rules governing global times (GMT differential and UTC offset) and summer time are determined by each individual country.
6