Casio EX-H5, EX-H5BK, MA1004-A Changing the “Number of Shots” Setting, Use, this, Select, Notes:, CS speed, setting:, Number of, 4sec (5fps), conditions:, Subject type, 1sec (20fps)

	CS speed	Number of		Subject type
		images
Moving Subject	20 frames per	20 images	Creates a moving subject from the
1sec (20fps)	second		CS images.
			•	The subject is cropped out of
Moving Subject	10 frames per	20 images
				each of the CS images.
2sec (10fps)	second
			•	“Moving Subject 1sec (20fps)”
				provides smooth subject
				movement, but recording time is
Moving Subject	5 frames per	20 images		limited to one second.
			•	“Moving Subject 4sec (5fps)”
4sec (5fps)	second
				provides more recording time,
				but subject movement is slightly
				rough.
			Records a single subject, which is
Still Subject	–	1 image	cropped and inserted into the
			background image.

Changing the “Number of Shots” Setting

Normally you need to shoot the subject you want to extract against a background and then shoot the background again without the subject. When the subject is against a plain background, however, you can extract the subject after shooting only once. Perform the following procedure when you want to change the “Number of Shots” setting.

1.Before shooting the subject in step 4 under “Step 1: Shoot the subject.” (page 6), press [SET].

2.Use [8] and [2] to select the third Control Panel option from the bottom (Select Subject Type) and then press [SET].

3.Use [8] and [2] to select “number of shots” and then press [SET].

4.Use [8] and [2] to select the number of shots you want and then press [SET].

To shoot under these	Select	Notes:
	this
conditions:
	setting:
The subject against a complex	2	You need to shoot twice to extract
background		the subject.
The subject against a plain (no	1	You need to shoot only once to
pattern) background		extract the subject.

11Creating a Dynamic Photo Image