Advanced Settings

The following are menu operations you can use to configure various camera settings.

REC mode menu contents and operations are different from those in the PLAY mode. This section explains operations using the REC menu screen. See page 89 for information about PLAY menu screen operations.

Using On-screen Menus

.Example REC Menu Screen Operation

1.In the REC mode, press [SET].

2.Use [8] and [2] to select the second Control Panel option from the bottom (MENU) and then press [SET] (page 32).

This will display the REC menu screen.

3.Use [4] and [6] to select the tab where the menu item you want to configure is located.

[8] [2] [4] [6]

[SET]

4.Use [8] and [2] to select the menu item you want, and then press [6].

5.Use [8] and [2] to change the setting of the selected menu item.

6.After the setting is the way you want, press [SET] to apply the setting and return to the viewfinder screen.

Pressing [4] instead of [SET] applies the selected setting and returns to the menu item selection.

To configure settings on another tab after pressing [4] to return to the menu item selection,

use [8] or [] (Delete) to move the highlighting up to the tabs, and then use [4] and [6] to select the tab you want.

NOTE

Example:

When “Lighting” is selected on the “Quality” tab

Tabs

Selected Settings menu item

[] (Delete) provides a helpful way to navigate around tabs and menus.

Pressing [] (Delete) while a tab is selected will display the viewfinder screen.

Pressing [] (Delete) while menu item or setting is selected will “back step” in the following sequence: Settings * Menu items * Tab.

65

Advanced Settings