Shooting a Snapshot while Shooting a Movie
1.While a movie is being recorded, press the shutter button. Movie recording continues after the snapshot is recorded.
NOTE
• You can use [2] ( ) while shooting a movie to change the flash mode setting.
•Movie recording is interrupted for a few seconds at the point where a snapshot is recorded.
•Shooting a snapshot during movie recording is not possible when shooting with any of the following.
–Premium Auto
–Some BEST SHOT scenes
Recording Audio Only (Voice Recording)
Voice Recording lets you record audio only, without a snapshot or movie.
• For information about Voice Recording capacities, see page 168.
1.In the REC mode, press [SET].
2.Use [8] and [2] to select the bottom Control Panel option (BS) and then press [SET] (page 33).
3.Use [8], [2], [4], and [6] to select the “Voice Recording” scene and then press [SET].
This causes ` to appear on the monitor screen.
4. Press the shutter button to start recording.
•The back lamp flashes green while recording is in progress.
•Pressing [SET] during recording will insert a marker into the recording. During playback, you will be able to jump to the markers in the recording.
5.Press the shutter button again to stop audio
recording.
• To create another audio recording file, repeat steps 4 and 5.
•To turn off Voice Recording, press [SET], use [8] and [2] to select the bottom Control Panel option (BS), and then select R (Auto).
53Recording Movie Images and Audio