Operation Guide DQ-950S

GENERAL GUIDE

1 SNOOZE/LIGHT button

•Press this button to illuminate the display for about five seconds.

•The SNOOZE/LIGHT button is the area at the top of the clock panel marked “SNOOZE/LIGHT”.

•Pressing this button while the alarm is sounding stops the alarm.

2 MAX/MIN button

Press this button to display the high and low temperature and humidity values.

3 °C/°F button

Press this button to toggle the temperature units between Celsius and Fahrenheit.

4 + (UP) / – (DOWN) buttons

Use these buttons to change the alarm time or the setting that is flashing on the display.

5 SET button

Use this button when setting the current time.

6 DEMO button

Press this button to test the alarm sound.

7 RESET button

Press this button to reset the clock after replacing its batteries.

8 Alarm Mode selector SNOOZE: Snooze alarm on ON: Alarm on

OFF: Alarm off

USING THE CLOCK

1. Press the SET button (5) to cycle through the setting screens as shown below.

Normal Timekeeping Screen

Contrast Setting Screen

Year Setting Screen

12-hour/24-hour

 

Setting Screen

Month and Day Setting Screen

Time Setting Screen

2. While the screen you want is displayed, use the – (DOWN) and + (UP) buttons (4) to change the flashing digits.

 

MAX/MIN

 

 

Press – (DOWN) to decrease

 

 

Press + (UP) to increase

 

 

the flashing digits.

 

 

the flashing digits.

 

 

 

 

 

 

 

 

•Holding down + (UP) or – (DOWN) changes the flashing digits at high speed.

•You can set the year in the range of 2000 to 2099. The day of the week is set automatically in accordance with the date setting.

•Pressing + (UP) or – (DOWN) while the Time Setting Screen is on the display causes the seconds count to be reset to 00.

•Each press of + (UP) or – (DOWN) while the 12-hour/24-hour Setting Screen is on the display toggles between 12-hour and 24-hour timekeeping.

•You can set the contrast level in the range of 1 to 10.

3.After making the settings you want, use the SET button (5) to display the Normal Timekeeping Screen.

•The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display for about three minutes without performing any operation.

2