Operation Guide
USING THE ALARM
The alarm sounds when the alarm time you set is reached. You can also use the Alarm Mode selector (8) to select the snooze alarm feature.
Setting the Alarm Time
Use the – (DOWN) and + (UP) buttons (4) to set the alarm time.
Pressing the – (DOWN) and + (UP) buttons (4) causes the alarm time to appear in place of the date on the display.
| MAX/MIN |
|
| ||
Press to change the alarm |
|
|
|
| Press to change the alarm |
|
|
|
| ||
time setting |
|
|
|
| time setting (+). |
|
|
|
|
|
|
|
|
|
|
|
|
•Holding down + (UP) or – (DOWN) changes the digits at high speed.
Turning the Alarm On and Off
Use the Alarm Mode selector (8) on the side of the clock to turn the alarm on and off, and to select the snooze feature.
Alarm Mode selector | Description |
The alarm sounds at the preset time for one minute, and seven more times every five
SNOOZE minutes thereafter. Even if you stop the alarm by pressing the SNOOZE/LIGHT
button (1), the alarm sounds again about five minutes later.
•The indicator 
flashes on the display to indicate that the snooze feature is activated.
ON
The alarm sounds at the preset time for one minute.
| OFF | The alarm does not sound. |
•The alarm time appears in place of the date on the display whenever the Alarm Mode selector (8) is set to ON or SNOOZE.
•The volume of the alarm sound cycles through five levels as it sounds.
Stopping the Alarm
•When alarm is sounding, press the SNOOZE/LIGHT button (1) to stop it. When the snooze feature is turned on, the alarm will sound again in about five minutes.
•To turn off the snooze feature, slide the Alarm Mode selector (8) to OFF.
USING THE LIGHT
Pressing the SNOOZE/LIGHT button (1) turns on the light and illuminates the display for easy reading in the dark.
Important!
•Overuse of the light can shorten battery life.
THERMOMETER AND HYGROMETER FUNCTIONS
A
The readout from the temperature sensor can also be switched between Celsius (°C) and Fahrenheit (°F).
Temperature Measurements
•The temperature display shows “LO” for temperatures below
•Though temperature readings are displayed up to 0°C (32°F) and greater than 41°C (105°F), note that such readings are actually outside the guaranteed temperature range of this clock.
Switching between Celsius and Fahrenheit
•Push the °C/°F button (3) to select either Celsius (°C) or Fahrenheit (°F).
•Switching between Celsius and Fahrenheit causes current high temperature/humidity and low temperature/ humidity memory contents to be cleared.
| Celsius (°C) | Fahrenheit (°F) |
°C/°F button (3)
°C | °F |
Humidity Measurements
•The humidity display shows “LO” for humidity below 10% and “HI” for humidity above 90%.
•Whenever the current temperature is outside the range of 0°C to 49.9°C, the humidity display will show “–
Daily High Temperature/Humidity, Low Temperature/Humidity Memory
•The clock remembers the highest and lowest temperature and humidity readings for the current
•Daily high and low temperature/humidity memory contents are cleared each day at midnight.
Changing the Temperature/Humidity Display Screen
•Press of the MAX/MIN button (2). Each press cycles between screens as shown below. Current temperature and humidity
MAX/MIN button (2) | MAX/MIN button (2) |
High temperature and humidity | Low temperature and humidity |
MAX/MIN button (2)
Turning On Temperature/Humidity Screen Auto Cycling
•Hold down the MAX/MIN button (2) for about one second. This will turn on temperature/humidity screen auto cycling, which causes the screen contents to cycle from one screen to the next at regular intervals.
Current temperature and humidity
High temperature and humidity | Low temperature and humidity |
•To turn off temperature/humidity screen auto cycling, press the MAX/MIN button (2).
3