General Guide
11. Chord name display
Shows chord names while auto accompaniment is being used.
12. Pointers
A pointer appears next to the applicable function when you have voice fingering guide, touch response, or key lighting turned on.
Display examples shown in this User’s Guide are intended for illustrative purposes only. The actual text and values that appear on the display may differ from the examples shown here.
Level Meter Screen
Under certain conditions, you can display a digital level meter secreen. The level meter has 16 segments, divided between two lines of eight segments each. Besides showing the volume level of each part that is turned on, the level meter also indicates the current on/off status of each track. During Squencer playback standby, the level meter can be used to check which track has data stored in it.
You can display the level meter in the following cases.
While the tone/rhythm screen is on the display
In the Music Library Mode
During sequencer playback standby
During sequencer playback
To display the level meter
1. While holding down the FUNCTION button, press the EFFECT/(L. METER) button.
1Currently selected mixer group
2 Upper row
3 High level
4 Low level
5 Indicates part is off or does not exist
6 Indicates part is on
7 Lower row
2.Hold down the FUNCTION button and press the LAYER/(GROUP A/B) button to cycle through the mixer group settings.
The information being displayed in the upper row and lower row of the level meter depends on the currently selected mixer group (page
*[A ] ..... Group A (Internal)
The upper level meter row shows this: Upper 1, Upper 2, Lower 1, Lower 2, Harmonize 1, Harmonize 2
The lower level meter row shows this: Percussion, Bass, Chord 1, Chord 2, Chord 3, Chord 4, Chord 5
*[ B] ..... Group B (External)
The upper level meter row shows this: Part 1 through Part 8
The lower level meter row shows this: Part 9 through Part 16
*[AB]
Displaying the level meter screen while in the Music Library Mode displays the parts of both mixer groups (A and B).
3. To exit the level meter display, press the EXIT/ NO button.
|