Casio PX110 Using the Built-inMetronome, METRONOME, Selecting the Pedal Function, FUNCTION, FUNCTION, FUNCTION, FUNCTION, TEMPO [ ], METRONOME

Press the METRONOME button.

Playing with Different Tones

Selecting the Pedal Function

Apedal connected to the piano’s PEDAL jack can operate as either a soft pedal or a sostenuto pedal. When you turn on the digital piano, the pedal is initially configured for soft pedal operation. You can perform the following operation to select either soft or sostenuto for the pedal operation.

1While holding down the FUNCTION button, use the keyboard keys shown below to select either soft or sostenuto.

Sostenuto

Soft

▲	▲	▲	▲	▲	▲	▲	▲
C1	C2	C3	C4	C5	C6	C7	C8

Adjusting the Effect Applied when the Damper Pedal is Pressed Half Way (With optional SP-30 only)

You can specify to what extent the damper effect should be applied when you press the damper pedal half way. A setting in the range of 0 (no effect) to 42 (same effect as full press) can be specified.

1 While holding down the FUNCTION button, press one of the keyboard keys shown below to specify the setting you want.

▲

Using the Built-in Metronome

You can use the metronome to sound a count that helps keep you in proper time.

NOTE

•If you want to use layer/split in combination with the metronome, first press the RHYTHM button so the rhythm lamp (under the button) is lit.

•This starts the metronome.

2 While holding down the FUNCTION button, use the keyboard keys shown below to specify how many beats there are per measure.

•The first value of the beat can be set to a value of 2 through 6. The bell (indicating the first beat of a measure) does not sound while a value of 0 is specified. All beats are indicated by a click sound. This setting lets you practice with a steady beat, without worrying about how many beats there are in each measure.

3 While holding down the FUNCTION button, use the TEMPO [ ] and [ ] buttons to change the tempo (speed) of the metronome.

								Decreases the	Increases the
▲	▲	▲	▲	▲	▲	▲	▲	tempo value	tempo value
C1	C2	C3	C4	C5	C6	C7	C8
	: Decreases the effect							• You can also use keyboard keys to change the
	: Decreases the effect							tempo setting (see page E-10).
	: Increases the effect							tempo setting (see page E-10).
	: Increases the effect
	• To return the volume setting to its initial default,							4 Press the METRONOME button again to
	hold down the FUNCTION button and press							4 Press the METRONOME button again to
	both of the keys at the same time.							stop the metronome.
	both of the keys at the same time.

404A-E-011B

E-9