Playing a Music Library Tune
Your piano comes with 60 Music Library tunes built in. See the Song List on page
1 Press the MUSIC LIBRARY button so the MUSIC LIBRARY indicator lamp (above the button) is lit.
• Each press of the button toggles between the upper indicator lamp and lower indicator lamp.
NOTE
•You can also cycle through the available tunes in step 2 by holding down the FUNCTION button and
pressing the SONG/RHYTHM SELECT [ ] or [ ] button.
•Pressing the two SONG/RHYTHM SELECT buttons at the same time selects tune 0.
•You cannot use layer or split while playing a built- in tune.
2
3
4
While holding down the FUNCTION button, press the keyboard keys shown below to input a tune number.
Press the START/STOP button.
•This starts the playback of the tune.
Press the START/STOP button again to stop tune playback.
Turning the Count On and Off
Use the following procedure to turn the count that sounds at the beginning of a song on and off.
1 While holding down the FUNCTION button, press one of the keyboard keys shown below to turn the count tone on or off.
On
Off
▲ | ▲ | ▲ | ▲ | ▲ | ▲ | ▲ | ▲ |
C1 | C2 | C3 | C4 | C5 | C6 | C7 | C8 |
START/
STOP
FUNCTION SONG/RHYTHM | MUSIC | LEFT/TRACK1 |
SELECT | LIBRARY | RIGHT/TRACK2 |