GETTING ACQUAINTED
AUTO POWER OFF
Auto Power Off turns off camera power if no operation is performed for five minutes in the PLAY mode. In the REC mode, you can specify an Auto Power Off trigger time of two or five minutes.
SLEEP
The monitor screen enters a sleep state if no operation is performed for a specified amount of time in the REC mode. Pressing any button immediately wakes up the monitor and restores normal operation. You can specify 30 seconds, 1 minute, or 2 minutes before the sleep state is triggered, or you can turn off this setting entirely.
5.On the screen that appears, use [] and [] to make the setting you want, and then press SET/DISP.
Auto power off settings: “2 min” “5 min”
Sleep settings: “Off” “30 sec” “1 min” “2 min”
•In the PLAY mode, the Auto Power Off trigger time is fixed at five minutes.
•Sleep is disabled in the PLAY mode.
•Performing any button operation while the monitor is asleep immediately wakes it up and restores normal operation.
1.Align the POWER/Function Switch with REC.
2.Press MENU.
3.Use [],[],[] and [] to select “FUNCTION”, and then press SET/DISP.
4.Use [] and [] to select the item whose set- tings you want to change, and then press SET/ DISP.
•To make auto power off settings, select “Auto Power Off”.
•To make sleep settings, select: “Sleep”.
•The Auto Power Off setting is given priority if you have “2 min” set for both Sleep and Auto Power Off. This means that the camera turns off if you do not perform any operation for about two minutes in the REC mode.
•Auto Power Off is automatically disabled under any one of the following conditions.
—While a slideshow is playing
—When you are performing operations on a com- puter, printer, or other external device connected to the camera’s DIGITAL terminal or USB port.
—While the AC adaptor is connected to the camera