GETTING ACQUAINTED

Memory Cards

This camera supports use of a CompactFlash memory card (CF TYPE I/II) or IBM microdrive for image storage. Note that all mentions of “memory” card in this manual refer both to a CompactFlash memory card and IBM microdrive, unless specifically noted otherwise.

IMPORTANT!

Make sure that the power of the camera is turned off before you insert or remove a memory card.

When inserting a memory card into the camera, make sure that the card is oriented correctly. Make sure that the correct side of the card is facing up, and that you insert the correct end of the card into the camera.

2.With the side of the memory card marked with an arrow facing the same direction as the camera’s monitor screen, slide it into the slot and push it in as far as it will go.

If the eject button is extended, press it in before sliding the memory card into the slot.

Eject button

Side marked with arrow should face the same direction as the monitor screen!

Inserting a Memory Card into the Camera

3. Close the memory card

1. Open the memory card

slot cover.

 

slot cover.

 

Memory card slot cover

E-39