,
Auto Power Off (page 33) is disabled whenever Slide Show is being used. This means you should not leave Slide Show running when using batteries to power the camera. Doing so can rundown batteries. Be sure to stop Slide Show and turn off the camera after you are finished.
To return the image to its normal size, press any button besides [+], [–], and DISP.
6.
IMPORTANT!
• Pressing ZOOM at this time increases the displayed image to four times its normal size. Each press of ZOOM toggles the image between two times and four times its normal size.
Slide Show automatically scrolls through the images stored in memory. You can also specify how much time should be allowed between each image.
• The portion of the selected area appears on the dis- play at twice its normal size.
Slide Show
Specify the area.
5.
“Zoom”.
3.Press MENU.
3.Press MENU.
4.Select “View”
Slide the Function Switch to PLAY.
Slide the Function Switch to PLAY.
1.
2. Use [+] and [–] to select the image you want to zoom.
1.
2. Use [+] and [–] to display the first of the images that make up the panorama you want to re- group.
To re-group panorama images
IMPORTANT!
• You cannot group movie images or images of different quality into a panorama.
• You can group up to nine images.
IMPORTANT!
Movie and panorama images cannot be zoomed.
Transferring a panorama to a personal computer causes its images to become ungrouped. If you download the pan- orama back to the camera, you will be unable to play it back as a panorama unless you use the following procedure to re- group the images.
The following operation lets you magnify an image to twice
its normal size. Note that you can zoom only a single still image.
Regrouping Panorama Images
Using Zoom
• Use [+] and [–] to move the area selection frame left
and right. Useand · to move it up and down.
| | | | PLAYBACK | | PLAYBACK |
4.Select “Tools” | | “Group” | | “Panorama”. | | To ungroup panorama images |
| |
1. Perform steps 1 through 3 under “ To re-group panorama images” on page 69.
2. Select “Tools” | | “Group”. |
|
3.Press the shutter button.
5.Use [+] and [–] to scroll through the other im- ages that make up the panorama until the one
you want to use as the final image is on the dis- play.
6.Press the shutter button to re-group the pan- orama images.
•The panorama playback screen (page 68) appears af- ter the re-grouping operation is complete.
69 70
| Displaying Multiple Images | 4.Use [+] and [–] to scroll through images stored |
| in memory. |
| The following operation lets you simultaneously view either |
| • To view a particular image in normal size, press DISP. |
| four or nine images on the same screen. This capability is |
| This causes an image number to appear in the upper |
| especially useful when playing back to the screen of a con- |
| left corner of the monitor screen. Use [+] and [–] to |
| nected TV, and can be used to display a catalog of products, |
| change to the number of the image you want to view |
| etc. | |
| | and then press the shutter button to display the image. |
| • The multi-image screen shows all 16 images of a movie on |
| |
| a single screen. | | |
| · , ZOOM | | 5. After you are finished, press any button be- |
| | |
| | | sides [+], [–], or DISP return to the normal |
| 1. Slide the Function Switch to PLAY. | single-image display. |
| |
| 2. Press MENU. | | |
| 3.Select “View” | “4 Images” or “9 Images”. | |
•The first image of the set is the image that was on the screen when you performed step 2 of this operation. The other images are those that sequentially follow the first one.
7172
