Casio QV-770 Infrared Data Transfer Precautions, Transferring Images Using PC Link Software, 6.Use [+] and [–]to select ALL, and then press the shutter button

5.Use [+] and [–] to select SEND, and then press

the shutter button.

6.Use [+] and [–] to select ALL, and then press the shutter button.

7.Use step 6 of the proce-

d u r e u n d e r “

BUTTON OPERATION” on page 67 to start the data transfer operation.

TROUBLESHOOTING

		Symptom		Probable Cause
	No power		1.	Batteries not loaded correctly.
			2.	Dead batteries
			3.	Wrong AC adaptor
	Sudden power failure		1.	Operation of Auto Power Off
Supply			2.	Low battery power
			3.	Use of manganese batteries.
Power
		indicator on LCD	Batteries are about to go dead.
	No recording when shutter		1.	Function Switch sets to PLAY.
	button is pressed		2.	Flash unit is charging.
			3.	The message “MEMORY FULL” is on the monitor
				screen.
			4. The message “REMAINING” is on the monitor
				screen.
Recording	Power failure during self-		Low battery power
	timer operation
	Poor LCD image focus		Incorrect NORMAL/MACRO switch setting
	Poor color and brightness		Indoor fluorescent lighting
	when indoors

INFRARED DATA TRANSFER INFRARED DATA TRANSFER

Transferring Images Using PC Link Software		4.		Use [+] and [–] to select
				QV-LINK, and then press
With PC Link Software, Cable-free	infrared image data
				the shutter button.
transfer can be performed with a personal computer that
supports IrDA1.0 protocol or later. See the documentation
that comes with your computer for details on its infrared
communication capabilities.
1. Slide the Function Switch to	the PLAY posi-	5.		Align the infrared port of the camera with the
tion.				port of your computer.
2. Press MENU.			6. Start up the PC Link software on your com-
				puter and transfer the images you want.
3. Use [+] and [–] to select
IR, and then press the
shutter button.

69 70

			TROUBLESHOOTING
	Action			Symptom		Probable Cause
1.	Correctly load batteries (page 16).			Cannot perform movie re-	1.	Movie Record Mode is not selected.
2.	Replace batteries with new ones (page 16).			cording.
3.	Use only recommended AC adaptor .		Recording		2.	Insufficient camera memory capacity.
1. Turn power back on.
2.	Replace batteries with new ones (page 16).
3.	Replace manganese batteries with alkaline bat-			Color of recorded image is	Reflection from sunlight or light from another
	teries.			strange.	source
Replace all four batteries with a set of new ones				No +/– button operation	Button operation during page change
(page 16).			Playback	during multi-page display
1.	Set Function Switch to REC.			Camera is connected to a	1.	Incorrect camera-TV connection
2.	Wait until flash unit charging is finished.			TV, but LCD monitor con-
3.	Delete images you no longer need from camera			tents do not appear on TV	2.	Wrong TV set up
	memory.			screen.
4.	Press	to change to another resolution		Delete operation does not	All pages are protected.
	mode, or delete images you no longer need from
	camera memory.		Deletion	operate.
Replace batteries (page 16).
				Menu icon is blue and noth-	Icons for functions that are disabled in the Playback
				ing happens when it is se-	Mode are blue.
Use NORMAL for scenery and group photos, and				lected.
MACRO for close-ups (page 24).
			Other	All buttons and switches do	Malfunction due to static electrical charge or strong
Shoot under incandescent or other non-fluorescent				not operate.	impact.
lighting (page 21).					Camera is connected to a computer or QV Color
					Printer.

71 72

Infrared Data Transfer Precautions

•Make sure that the infrared ports of the sending unit and the receiving unit are pointed straight at each other, and that there is nothing blocking the path between them.

•To avoid problems that occur due to sudden loss of battery power during infrared image transfer, we recommend that you use the separately AC adaptor specified for this cam- era when transferring images.

•This camera cannot perform infrared data transfer with any device that does not support the IrTran-P protocol.

•Avoid performing infrared data transfers in areas expose to direct sunlight or other strong illumination.

•Such conditions as natural outdoor light, low battery power, too much distance between infrared ports, and misalign- ment of infrared ports can cause failure of image transfers or corrupted data.

•Proper image data transfer is impossible whenever there is anything blocking either of the infrared ports.

•Do not locate any other infrared emitting device (such as remote control units) or fluorescent lighting in the vicinity of the cameras while they are performing infrared image transfers.

•A sender ID, which shows manufacturer and model name, normally appears on the display during infrared data com- munication. Some equipment, however, does not transmit a sender ID, in which case nothing appears on the display.

•Failure to be able to establish an IrDA connection can mean that the device you are trying to communication with does not support the IrDA standard, or that the applications being used are not compatible. When this happens, you probably have to connect the camera to the computer with

a separately available cable for data transfer.

Action

1.Press MODE to enter the Movie Record Mode (page 27).

2.Delete images you no longer need from camera memory, so there are at least two images worth of free memory capacity (page 54).

Reorient the camera so that light is not shining directly into lens.

Wait until an image is on the LCD before performing a button operation.

1.Connect correctly using the special video cable that comes with the camera (page 60).

2.Set up the TV correctly.

Unprotect the page you want to delete (page 51).

Select a different function or change to the Record

Mode.

Remove batteries and disconnect the AC adaptor if you are using one. Restore power and turn the camera on. If this does not work, contact your dealer or an authorized CASIO service provider.