Casio QV-R100 POWER, POWER, Problem, TV screen, “No image”, “Copy error”, automatically, “Memory full”, “File locked”, “Card locked”, LCD turns dark, “Format error”

Troubleshooting

	Problem	Cause and/or Action
	Camera does not turn on.	The battery may be exhausted. Charge or replace
	Camera does not turn on.	the battery.
		the battery.

	Camera turns off	Press the POWER button to turn on the camera.
	automatically.	Press the POWER button to turn on the camera.
	automatically.
	LCD turns dark.	Press any button except the POWER button to turn
	LCD turns dark.	on the LCD.
		on the LCD.

	Empty battery icon is
	displayed on the LCD, then	Battery is exhausted, please replace or recharge.
	the camera turns off.
	LCD monitor displays	There is no image file in the memory card. Image
	“No image”.	file format may not be supported.
	LCD monitor displays	Function is only available for specific file types. File
	“Not available for this file”.	format is not supported.
	LCD monitor displays	Memory card is full. Replace the memory card with
	“Memory full”.	a new one or delete unnecessary images.
	LCD monitor displays	This file is locked. Unlock the file. See “Protect” on
	“File locked”.	page 55.
	LCD monitor displays	The memory card is protected. Remove the card
	LCD monitor displays	and slide the write-protect switch to its unlock
	“Card locked”.	and slide the write-protect switch to its unlock
	“Card locked”.	position.
		position.

	LCD monitor displays	The card may be damaged. You can either change
	“Format error”.	the card or wipe to clean the connected points.
		The memory card is protected. Remove the card
	LCD monitor displays	and slide the write-protect switch to its unlock
	LCD monitor displays	position.
	“Copy error”.	position.
	“Copy error”.	The memory card is full. Replace card or delete
		The memory card is full. Replace card or delete
		unnecessary files.

	No image displays on the	Incorrect TV-out type was selected. Set the correct
	TV screen.	TV-out type to match your TV system.
		Do not force the lens to go back.
	The lens is stuck.	The type of the battery used may be incorrect or the
	The lens is stuck.	battery power level is too low. Change the battery or
		battery power level is too low. Change the battery or
		charge the battery before using the camera.

		The camera’s protection function may have
	LCD monitor Displays	activated because camera temperature is too high.
	“Auto Shutdown”.	Turn off the camera and wait until it cools down
		before trying to use it again.

82	Appendix