To install journal paper

Step 1

Remove the printer cover.

(If the cover is locked, unlock by using the printer cover key before this step.)

Step 2

Open the platen arm.

Step 3

Ensuring the paper is being fed from the bottom of the roll, lower the roll into the space behind the printer.

Step 4

Put the leading end of the paper over the printer.

Step 5

Close the platen arm slowly until it locks steadily.

Locking platen

Step 6

Slide the leading end of the paper into the groove on the spindle of the take-up reel and wind it onto the reel two or three turns.

Step 7

Place the take-up reel into place behind the printer, above the roll paper.

Step 8

Press the key to take up any slack in the paper.

During machine installation, press the key after power on.

Complete

Close the printer cover.

Getting Started

TE-8000F/8500F User’s Manual

13 E