Casio WK-3200, CTK-900, WK-3700 manual Drawbar Parameter, System Chorus

Note 1:

See "42.7 -99 to 0 to 99 Setting Value Table".

Note 2:

See "42.4 -24 to 0 to 24 Setting Value Table".

Note 3:

See "42.6 Pan Setting Value Table".

Note 4:

This specifies the volume of data sent from System Chorus to System Reverb.

Note 5:

When "DSP Bypass" is specified for "DSP Line Bypass," the DSP Line Select settings of all parts are cancelled, and all DSP lines are treated as if they are turned off. This means that notes that are currently sounding are not affected.

Drawbar Parameter
ParamID	Parameter			index	bit	Value	Default	Setting Value
								(Decimal)
0C	Bar Position		Bar Num (Note 1)		02	0-3	0	0-3
0D	Percussion			0	02	00-03	00	off,2nd,3rd,2nd+3rd
						(Note 2)
0E	Percussion Decay Time			0	07	00-7F	28	0-12.7sec
0F	Click			0	01	0-1	00	0...Off
								1...On
Note 1:
See "10.20.3 Drawbar Position" for information about index numbers.
Note 2:
See "42.18 Drawbar Percussion Setting Table" for information about percussion setting values.
System Chorus
ParamID	Parameter			bit	Value	Default	SettingValue(Decimal)
10	Chorus Macro Num (Note 1)			05	00-0F	02	0-15
11	Chorus	Level		07	00-7F	40	0-127
12	Chorus	Rate		07	00-7F	03	0-127
13	Chorus	Depth		07	00-7F	13	0-127
14	Chorus Feedback (Note 2)			07	00-7F	00	0-127
15	Chorus	Tone (Note	3)	07	00-7F	7F	0-127

Note 1:

Selects the System Chorus preset type. Receipt of GM/GS Reset selects Chorus3. The other System Chorus parameters are changed to preset values in accordance with this type value. See "42.11 Chorus Type Setting Value Table."

Note 2:

Sets the System Chorus feedback volume.

Note 3:

Adjusts the System Chorus timbre.

48