3. Restart/Format/Setup
Restart operation (1.When erratic data appears; 2.After replacing battery)
After replacing the battery, the electric current can be unstable which might effect the operation of the OS1.0. To avoid this you must press the RESTART button after replacing the battery.
Note: After restart operation, Elapsed Time, Trip Distance, Average Speed, Maximum Speed and Clock Time is erased. Set Clock Time again.
Format operation (1.Before first use; 2.When erasing all the stored data) Caution: Take note that all the data is erased by this operation.
If you want to stop format operation, select "NO" and
the unit returns to measuring screen.
This operation erases all the data and settings.
1.Hold down both MODE/SELECT buttons simultaneously, press and release RESTART button. The message "FORMAT?" appears.
2.Select "YES" and press ENTER/START/STOP button.
Once format operation is done, the unit need to be set up from the first step.
Setup
In addition to Quick Setup that is writ- ten in the Setup guide, there is Custom Setup (see the next page). In the Cus- tom Setup, you can select only your fa- vorite functions that you want to use, and you can also choose your preferred font size and input your personal data. Note: By pressing the two SELECT/
MODE buttons simultaneously you can go back to the next pre- vious screen.
Goes to previous screen
Speed scale setting | Setup process | ||||
Tire size setting |
|
|
|
|
|
Date setting |
|
|
|
|
|
Time scale setting |
|
| Function customizing | ||
Clock time setting |
|
| Font size setting | ||
Custom setup entrance |
|
| Personal data input | ||
|
| ||||
NO | YES | ||||
|
|
|
|
| |
Setup finished |
|
| Setup finished | ||
QUICK SETUP |
|
| CUSTOM SETUP |
6OS 1.0