Cavalry Storage CADA-U3E4 Mode Setup And Array Management, SOFTWARE MODE-SETUP METHOD PC Users

MODE SETUP AND ARRAY MANAGEMENT	CHAPTER	2
There are two primary ways to setup your CADA-U3E4: the software method and the switch
method. The software method is by-far the easiest. The switch method, at this point in time, is a

method that can be used by MAC users and a feature for IT users who are setting up arrays on-the-fly.

But for the PC-based customers, we recommend the software method which utilizes the BackupQ application.

SOFTWARE MODE-SETUP METHOD (PC Users)

1. INSTALL THE SOFTWARE:

Load the included CD in your computer and copy the CD content onto your desktop.

Select the “Software” folder and run the setup.exe associated with your operating system.

Allow this program to make changes to your computer.

2. The RAID Manager setup window will appear. Continue installing the software by selecting “Install.”

3. Allow the software to complete the downloading process. When the status bar finishes loading, select the “Finish” button to launch the software.

4. If you have not already, install your hard drives by following the instructions on page 2 under “Tool-Less

Drive-Bay Installation.” Then, plug the CADA-U3E4into a power source with the included power supply.

Next, connect the CADA-U3E4into your computer via

USB 3.0/2.0 or eSATA cable and power on the unit.

CADA4-U3E

4