42
Connection of the Power Supply Cable
Unhook the terminal board cover by inserting a screwdriver into the two hooks “A” (fig. 41).
Open the cable gland by unscrewing screw “F” (fig. 42), unscrew the terminal screws and remove the cable.
The new supply cable, of suitable type and section, is connected to the terminal board following the diagram of fig. 43.
A
Fig. 41
F
Fig. 42
Feeder Cable Section
Type
230 V~ 3 x 1.5 mm2
230 V 
E |
|
| Earth |
|
| ||
N |
|
| Neutral |
L |
|
| Live |
LN
E
Fig. 43
