7 WASH PROGRAMME PHASES AND POWER CUTS
using the appliance and practical tips
PROGRAMME
PHASES
When the programme is running, the programme phase and the time remaining for it to end will appear on the display..
The active phases will appear successively at the top of the display as the programme progresses. The time remaining until the end of the programme will also appear on the display. It updates at regular intervals, but not minute by minute.
Any option button can be selected provided the wash phase in which it takes effect has not been passed and when the programme accepts the option.
Pressing the delay button during washing will have no effect on the washer.
Pressing the Start/Stop button during the wash activates the PAUSE function.
POWER CUTS
If there is a power cut, when the electricity comes back on the washing machine will continue to run from where it left off (it has several hours of memory). The same will happen if the ON/OFF button is pressed.
warnings
Level the washing machine by adjusting the feet to reduce the noise caused by
Try and wash clothes of different sizes in the same wash programme to favour the distribution of the clothes inside the drum during
| If the programme is changed on | |
| the selector dial during the washing | |
| and drying process, the washer will | |
| go onto PAUSE status and the | |
Important | programme will be cancelled. | |
If you need to add or remove a | ||
| ||
| garment, press the Start/Stop | |
| button and make sure that the water | |
| level is not above the door overflow | |
| level and that the temperature | |
| inside is not high. Press the | |
| Start/Stop button again to restart | |
| the wash from the same cycle | |
| phase it had stopped at. | |
|
All the models have a safety system for
If you find that the clothes are not properly wrung out, try
19
