safety and troubleshooting
Why doesn’t the washing machine take in water?
If no water is entering, F01 will appear on the display.
Indicator F01, no water coming in, this may be due to a cut in the water supply, a tap turned off or a blocked water inlet filter.
The possible solutions are as follows: wait for the water supply to be reconnected, turn on the tap, or remove the water inlet hose and clean the filter.
Why doesn’t the washing machine drain or
Why doesn’t the washing machine
If this failure is detected, F02 will appear on the display.
The reasons for the F02 indicator may be the following: washing machine drain pump blocked, building drainage pipes blocked, or incorrect pump electrical connection.
Solution: if the pump is blocked, gain access to it as described in section 2, maintaining and cleaning the appliance.
If this failure is detected, C03 will appear on the display.
This may be due to an uneven distribution of clothes in the drum and may cause an excessive level of vibrations.
The solution is to select a
Why can’t I see any water in the drum during the wash?
This is due to the fact that the washing machine is provided with a system which is able to adapt to the load and type of fabrics, adjusting the levels of water and energy used, in order to preserve the environment.
So, although the water level you can see through the hatch may look low, there is no cause for concern as washing and rinsing efficiency will still be optimum.
23
