XDVD9101 OPERATION
Troubleshooting
General
Problem | Cause | Action | |
| Yellow wire not connected or incorrect | Check connections for proper voltage (11~16VDC) | |
Unit will not turn on | voltage Red wire not connected or incorrect |
| |
voltage |
| ||
(no power) |
| ||
| Black wire not connected | Check connection to ground | |
| Fuse blown | Replace fuse | |
Unit has power | Speaker wires not connected | Check connections at speakers | |
One or more speaker wires touching each | Insulate all bare speaker wires from each other and | ||
(but no sound) | |||
other or touching chassis ground | chassis ground | ||
| |||
|
|
| |
| Yellow or red wire touching chassis ground | Check for pinched wire | |
Unit blows fuse | Speaker wires touching chassis ground | Check for pinched wire | |
| Incorrect fuse rating | Use fuse with correct rating | |
Unit has audio | Parking brake safety circuit not connected | Check connections at parking brake | |
(but no video) | Parking brake not applied | Apply parking brake as described on page 32 | |
No video display | Reverse circuit not connected | Check connections at reverse lamp | |
(when in reverse) | Vehicle is not in reverse | Select reverse gear | |
DVD does not start | Physical defect in media | Check media for scratches | |
playback | Wrong region | Use discs labeled "Region 1" or "All" only. | |
IR remote does not work | Dead battery | Replace battery | |
Excessive skipping | Unit is not mounted correctly | Check mounting sleeve | |
|
| ||
Physical defect in media | Check media for scratches | ||
| |||
Invalid Disc appears | Focus error or disc is in upside down | Press eject or RESET | |
on display |
|
| |
Invalid Region appears on | Region code error | Use only DVD's labeled “Region 1” or “All” only. | |
display |
|
| |
Front panel will not | Front panel obstructed | Remove the obstacle and press OPEN to resume the | |
open/close |
| monitor open/close sequence. |
67
