XDVD9101 OPERATION

Control Locations and Functions - Monitor Open

1

1 Close Monitor

2 Screen Angle Up

3 Info/Picture

4 Screen Angle Down

4 3

2

Close Monitor

Info/Picture

Screen Angle Up

Screen Angle Down

Monitor Notes

Press CLOSE to open or close the monitor. Be careful not to not touch or obstruct the monitor movement during the open/close sequence, or permanent damage could occur.

Press to display DVD disc information in DVD mode. Holding this button for 3 seconds brings up the Brightness setting, which can be adjusted by turning the rotary encoder or by pressing the t or u buttons on the main remote control.

Press momentarily to adjust the angle of the screen upwards. Press and hold to slide the monitor inwards.

Press to adjust the angle of the screen downwards. Press and hold to slide the monitor outwards.

The angle can also be manually selected via the screen setup menu.

The color of the LCD monitor varies between viewing angles. Select the angle with the most optimum view for your location.

The last position of the monitor can be saved in memory. When “TFT Auto Open” is set to "On" in the Main Setup menu, the monitor will return to its last position automatically the next time the unit is turned on.

12

Page 13
Image 13
Dual XDVD9101 owner manual Control Locations and Functions Monitor Open