XDVD9101 OPERATION

Control Functions - Monitor Closed

Power

Volume

EQ Preset

Caution

Momentarily press PWR or any other button (except EJECT) to turn the unit on. Press PWR for more than 3 seconds to turn the unit off.

Turn the rotary to adjust the volume level lower or higher (0-46). The current volume level will be displayed on the secondary LCD when the monitor is closed. Turning the rotary while the volume is muted will cancel the mute function.

Press the volume knob momentarily to select between Flat, Classic, Pop, Rock or User EQ presets.

Due to its highly technological design, the XDVD9101 faceplate is NOT removable. Do not attempt to remove the faceplate.

Upon installation, do not attempt to move the monitor by hand. Use the

or buttons, the OPEN button on the front panel or the remote control.

The unit will stop if it encounters any obstacles during the open/close sequence. If this occurs, remove the obstacle and press OPEN again to resume the monitor open/close sequence.

11

Page 12
Image 12
Dual XDVD9101 owner manual Power Volume EQ Preset