Dual XDVD9101 DVD Setup Parking Brake Initialization, Front Monitor Video Initialization

XDVD9101 OPERATION

DVD Setup - Parking Brake Initialization

CAUTION !!!

IT'S UNLAWFUL TO OPERATE A VEHICLE WHILE VIDEO IS DISPLAY IN THE DRIVERS VIEWING AREA

ENGAGE EMERGENCY BRAKE

TO WATCH VIDEO

Front Monitor Video

Initialization

Parking Brake Initialization Situation 1

Parking Brake Initialization Situation 2

SAFETY WARNING

•The video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash video functions will only operate when vehicle is in Park and the PARKING BRAKE is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion. Refer to local laws in your area.

•The vehicle must be in park and the parking brake applied to view video on the in-dash monitor.

•As a safety feature, !!Safety Warning!! blue screen will show on the display when the vehicle's parking brake is not engaged. Video display on the front monitor isn't allowed until the PARKING BRAKE is engaged. Connect the yellow/blue PARKING BRAKE wire to the brake switch circuit as described on page 6. Note: DVD and AUX AV audio can be heard while the vehicle is in motion without engaging the parking brake.

Follow these two initialization procedures carefully to allow video playback on on the XDVD9101 front monitor:

There are two situations to initiate the PARKING BRAKE sequence.

First situation (if vehicle is moving):

1)Stop vehicle, put in Park, make sure PARKING BRAKE is off/released.

2)Depress PARKING BRAKE for 1 second.

3)Release PARKING BRAKE for 1 second.

4)Depress PARKING BRAKE permanently.

Note:

Once above procedure 1-4 is completed, video will display in about 2 seconds.

Second situation (if vehicle is already parked and the PARKING BRAKE is already applied):

1)Keep vehicle in Park, PARKING BRAKE should be on.

2)Release PARKING BRAKE for 1 second.

3)Depress PARKING BRAKE for 1 second.

4)Release PARKING BRAKE for 1 second.

5)Depress PARKING BRAKE permanently.

Notes:

Once above procedure 1-5 is completed, video will display in about 2 seconds. The transition time must be less than 2 seconds between depress and release. This procedure must be repeated anytime the vehicle ignition is turned off.

32