Marantz SR4500 manual Ttest Mode, MENU STRUCTURE of Speaker Level setup

ENGLISH	2-3. SPEAKERS LEVEL
	Here you will set the volume for each speaker so
	that they are all heard by the listener at the same
	level. Moreover, if the T.TONE button is pressed,
	unit can enter into this menu directly.
	Note:

•The speaker level settings is not available in 7.1 channel input mode and Pure Direct mode.

T(TEST) MODE :

Selects “MANUAL” or “AUTO” for generating mode of test toneorcursor button.

If you select “AUTO” by pressing thebutton, the test tone will be cycled through in a circular pattern

1. When you select “MANUAL” in T-MODE menu

by pressing the	or button, this unit will emit
a pink noise from the front left speaker. At this
time, adjust the desired level of the master
volume. Remember the level of this noise and
then press the	button. This unit will emit the
pink noise from the center speaker.
2. Using the and	cursor buttons, adjust the
volume level of the noise from the center
speaker so that it is the same level as the front

left speaker (Note that this can be adjusted to any level between –10 and +10 dB in 1dB intervals).

Notes:

•Speakers that you selected “None” for in the Speaker Size Setup menu will not appear.

•The setup level for each channel is memorized for reproduction in all surround mode.

•To adjust the speaker levels for 7.1-channel input sources, you will need to use the 7.1CH Level Input setup menu.

MENU STRUCTURE of Speaker Level setup

Direct selec	Speakers
by remote	Distance	Test Tone mode
control	setup

which is L (Left) → C (Center) → R (Right) → SR (Surround Right) → SBR (Surround Back Right) → SBL (Surround Back Left) → SL (Surround Left) → SW (Subwoofer) → L →.. increments of 2 seconds for each channel.

Using the and cursor buttons, adjust the volume level of the noise from the speaker so that it is the same level for all speaker.

Press the ENTER button, you can stop the test tone mode. Or press the or cursor button to select “EXIT” then press the ENTER button to exit the SETUP MENU.

Or press the or cursor button to select “RETURN” then press the ENTER button to return the previous “2-2. Speakers Distance” setup.

Maximum

1 dB interval

Reference

1 dB interval

Minimum

+10dB

+9dB

button

0dB

button

-9dB

-10dB

(SW -15 dB)

	MANU	AUTO
		(Auto)
	Speaker
		SW
Speakers	L	C	R
Level setup
		Listening
	SL	Positiom	SR
		SBL	SBR
	TO MAIN MENU	RETURN	EXIT

If you select “MANUAL”, adjust the output level of each speaker as follow.

1. 3. 5. 1. 5. 1. 2. 5. 5.

AV SURROUND RECEIVER SR4500

INPUT SELECTOR

DISP

MULTI

AUTO

TUNED

ST V – OFF

NIGHT

PEAK

ATT

ANALOG

SURROUND

SLEEP

AUTO SURR

DIRECT

DISC 6.1

MTX 6.1

EQ

DIGITAL

DIGITAL

L

R

AAC PCM

SURROUND

PURE

SIMPLE

MODE

DIRECT

SETUP

DISPLAY

MEMORY

CLEAR

7.1CH INPUT

S. SPEAKER B

STANDBY

ENTER

AUTO

HT-EQ

MENU

EXIT

BAND

T-MODE

POWER ON/OFF

PHONES

		AUX1	AMP
2. 5.	TV		MAIIN
	VOL.	SLEEP	MUTE VOL.
1. 5.	OSD		MENU
		ENTER
1. 3. 5.	SET UP/		MENU OFF	5.
	T.TONE
	PURE DIRECT	AUTO	DTS

1 2 3

NIGHT CSII EX/ES VIRTUAL

4 5 6

3.	Press the	cursor button again. This unit will
	now emit the pink noise from the front right
4.	speaker.
	Repeat steps 2 and 3 above for the front right
	and other speakers until all speakers are
5.	adjusted to the same volume level.
	Press the ENTER button, you can stop the
	test tone mode. Or press the or cursor
	button to select “EXIT” then press the ENTER
	button to exit the SETUP MENU.
	Or press the	or button to select “RETURN”
	then press the ENTER button to return the
	previous “2-2. Speakers Distance” setup.

MAIN	Speakers	exit SETUP
MENU	Distance setup	MENU

20