Alesis K2661 specifications Chapter Master Mode, Tune, MasterSamples8192KMemory485K

Master Mode

The Master Mode Page

Chapter 11

Master Mode

Press the Master mode button to enter Master mode, which contains parameters affecting the K2661’s overall performance.

The Master Mode Page

On the Master-mode page you’ll find parameters for setting the overall tuning and transposition of the K2661, the MIDI channel to be used for KB3 programs (explained below), and for several keyboard and programming adjustments. You can also enter the sampler from the Master-mode page.

MasterSamples:8192KMemory:485K

Tune:0ct

Transpose:0ST

KB3Chan:1

VelTouch:1Linear

PressTouch:1LinearConfirm:On

Intonation:1EqualIntonaKey:C

ObjectDeleteUtilSampleGMMAST2

Parameter	Range of Values	Default
Tune	± 100 cents	0
Transpose	± 60 semitones	0
KB3 Channel	1 to 16	1
Velocity Touch	Velocity Map list	1	Linear
Pressure Touch	Pressure Map list	1	Linear
Intonation	Intonation Table list	1	Equal
Confirm	On, Off	On
IntonaKey	C–B	C

Tune

Adjusting the value of this parameter tunes every program in the K2661 by the amount you specify. Tuning can be adjusted up or down 100 cents (one semitone) in one-cent increments. This parameter is useful for getting in tune with recordings and acoustic instruments. Adjusting the tuning in Master mode does not change the settings on the PITCH page of individual programs, but will be added to any adjustments you make there. Master-mode tuning adjustments affect only the K2661’s notes, and not notes sent via MIDI.

11-1