Marantz SR4500 manual Basic Operation, Play Back, Using The Sleep Timer, Example DVD, English

BASIC OPERATION

(PLAY BACK)

SELECTING AN INPUT SOURCE

Before you can listen to any input media, you must first select the input source on the SR4500.

Example : DVD

AV SURROUND RECEIVER SR4500

POWER

TV VCR1 DSS/VCR2 DVD

TUNER CD TAPE CDR/MD

	AUX1	AMP
TV			MAIN
VOL.	SLEEP	MUTE	VOL.
	OSD	MENU

To select DVD, turn the INPUT FUNCTION SELECTOR knob on the front panel or simply press the DVD button on the remote.

After you have selected DVD, simply turn on the DVD player and play the DVD.

•The input name will appear in the display on the front panel.

•As the input is changed, the SR4500 will automatically switch to the digital input, surround mode, attenuation, and night mode status which were entered during the configuration process for that source.

•When an audio source is selected, the last video input used remains routed to the VCR1 & DSS/ VCR2 Outputs and Monitor Outputs. This permits simultaneous viewing and listening to different sources.

•When a Video source is selected, the video signal for that input will be routed to the Monitor Outputs jacks and will be viewable on a TV monitor connected to the SR4500.

If a component video input is connected to the DVD or DSS component inputs, it will be routed to the Component Video Output. Make certain that your TV is set to the proper input to view the signal.

SELECTING THE SURROUND MODE

Example : AUTO SURROUND

	ENTER
AV SURROUND RECEIVER SR4500
SET UP/		MENU OFF
T.TONE
PURE DIRECT	AUTO		DTS
	1	2	3
NIGHT	CSII	EX/ES	VIRTUAL
	4	5	6
DISPLAY	MCH-ST	STEREO	7.1CH IN
	7	8	9
CLEAR	MEMO	A/D	P.SCAN/V-OFF
		0
		CHANNEL/SKIP
BASS	TREBLE	TUNE/SEARCH

To select the surround mode during playback, press the SURROUND MODE button on the front panel or the Surround mode buttons on the remote.

ADJUSTING THE MAIN VOLUME

	TV	VCR1	DSS/VCR2	DVD
SURROUND	TUNER	CD	TAPE	CDR/MD
DIGITAL
AAC
		AUX1	AMP
	TV			MAIN
	VOL.	SLEEP	MUTE	VOL.
		OSD	MENU

ENTER

Adjust the volume to a comfortable level using the VOLUME control knob on the front panel or VOL

/buttons on the remote.

To increase the volume, turn the VOLUME knob clockwise or press VOL button on the remote, to decrease the volume, turn counterclockwise or press VOL button on the remote.

Notes:

•The volume can be adjusted within the range of – ∞ to 18 dB, in steps of 1 dB.

•However, when the channel level is set as described on page 20, if the volume for any channel is set at +1 dB or greater, the volume cannot be adjusted up to 18 dB.

(In this case the maximum volume adjustment range is “18 dB - Maximum value of channel level)

ADJUSTING THE TONE (BASS &

TREBLE) CONTROL

PURE DIRECT	AUTO		DTS
	1	2	3
NIGHT	CSII	EX/ES	VIRTUAL
	4	5	6
DISPLAY	MCH-ST	STEREO	7.1CH IN
	7	8	9
CLEAR	MEMO	A/D	P.SCAN/V-OFF
		0

CHANNEL/SKIP

BASS TREBLE TUNE/SEARCH

T-MODE RDS F.DIRECT

INPUT/DISC+ AUDIO SUB-T/ATT PTY

CH.SEL LIP.SYNC

During a listening session you may wish to adjust the Bass and Treble Control to suit your listening tastes or room acoustics.

(Using the remote control unit)

To adjust the bass effect, press BASS or BASS on the remote.

To adjust the treble effect, press TREBLE or TREBLE on the remote.

Note:

•The tone control function can work in the AUTO Surround, Stereo, Dolby PLIIx, DTS, DTS-ES, and Multi Ch. Stereo mode.

TEMPORARILY TURNING OFF THE

SOUND

TV VCR1 DSS/VCR2 DVD

TUNER CD TAPE CDR/MD

SURROUND

DIGITAL

AAC

	AUX1	AMP
TV			MAIN
VOL.	SLEEP	MUTE	VOL.
	OSD	MENU

ENTER

To temporarily silence all speaker outputs such as when interrupted by a phone call, press the MUTE button on the front panel or MUTE button on the remote.

This will interrupt the output to all speakers and the head-phone jack, but it will not affect any recording or dubbing that may be in progress.

When the system is muted, the display will show “MUTE” .

Press the MUTE button again to return to normal operation.

USING THE SLEEP TIMER				ENGLISH
TV	VCR1	DSS/VCR2	DVD
TUNER	CD	TAPE	CDR/MD
	AUX1	AMP
TV			MAIN
VOL.	SLEEP	MUTE	VOL.

OSDMENU

ENTER

To program the SR4500 for automatic standby, press the SLEEP button on the remote.

Each press of the button will increase the time before shut down in the following sequence.

OFF 10 20 30 40

90 80 70 60 50

The sleep time will be shown for a few seconds in the display on the front panel, and it will count down until the time has elapsed.

When the programmed sleep time has elapsed, the unit will automatically turn off.

Note that the SLEEP indicator on the display will illuminate when the Sleep function is programmed. To cancel the Sleep function, press the SLEEP button until the display shows “SLEEP OFF” and the SLEEP indicator will disappear.

NIGHT MODE

OSDMENU

ENTER

SET UP/		MENU OFF
T.TONE
PURE DIRECT	AUTO		DTS
	1	2	3
NIGHT	CSII	EX/ES	VIRTUAL
	4	5	6
DISPLAY	MCH-ST	STEREO	7.1CH IN

7 8 9

CLEAR MEMO A/D P.SCAN/V-OFF

0

CHANNEL/SKIP

BASS TREBLE TUNE/SEARCH

Press the NIGHT button on the remote to turn on the NIGHT mode.

Selecting the Night Mode ON is effective in Dolby Digital only, and it compresses the dynamic range. This softens loud passages such as sudden explosions, to help prevent disturbing others late at night.

To turn off the Night mode, press the NIGHT button again.

23