![RECORDING AN ANALOG SOURCE](/images/new-backgrounds/18135/1813563x1.webp)
ENGLISH
RECORDING AN ANALOG SOURCE
In normal operation, the audio or video source selected for listening through the SR4500 is sent to the record outputs.
This means that any program you are watching or listening to may be recorded simply by placing machines connected to the outputs for TAPE OUT,
To record the input source signal you are currently watching or listening to
1.
POWER
Recording the video from one source and the audio from another
You can add the sound from one source to the video of another source to make your own video recordings.
Below is an example of recording the sound from a compact disc player connected to CD IN and the video from a video camera connected to VCR1 to video cassette recorder connected to the DSS/ VCR2 OUT jack.
1. | TV | VCR1 | DSS/VCR2 | DVD |
|
|
|
| |
2. | TUNER | CD | TAPE | CDR/MD |
| AUX1 | AMP |
|
HT-EQ
AV SURROUND RECEIVER SR4500
| SURROUND |
| DIGITAL |
AAC | PCM |
Press the
The tonal balance of a film soundtrack will be excessively bright and harsh when played back over
7.1 CH INPUT
The SR4500 is equipped for future expansion through the use of Multi channel SACD multichannel player or
When this is selected, the input signals connected to the L(front left), R (front right), CENTER, SL (surround left), SR (surround right) and SBL (surround back left) and SBR (surround back right) channels of the 7.1 CH. In jacks are output directly to the front (left and right), center, surround (left
and right) and surround back speaker systems as well as the
In addition, the signal input to the SW (subwoofer) jack is output to the PRE OUT SW (subwoofer) jack.
AV SURROUND RECEIVER SR4500
TV | VCR1 | DSS/VCR2 | DVD |
TUNER CD TAPE CDR/MD
| AUX1 | AMP |
|
TV |
|
| MAIIN |
VOL. | SLEEP | MUTE | VOL. |
TV |
|
| MAIN |
VOL. | SLEEP | MUTE | VOL. |
| OSD | MENU |
|
audio equipment in the home. This is because film soundtracks were designed to be played back in large movie theater environments.
Activating the
When 7.1 CH. INPUT is selected, the last video input used remains routed to the Monitor Outputs.
This permits simultaneous viewing with video sources
OSD | MENU |
1. Switch the video output source to VCR1 by simply pressing the input selector buttons on the remote.
the correct tonal balance.
The
2. 1.
AV SURROUND RECEIVER SR4500
POWER |
1. Select the input source to record by turning the INPUT FUNCTION SELECTOR knob on the front panel or simply press the input selector buttons on the remote.
The input source is now selected and you may watch or listen to it as desired.
2. The currently selected input source signal is output to the TAPE OUT,
VCR1 OUT, and DSS/VCR2 OUT outputs for
recording.
3. Start recording to the recording component as desired.
2. Switch the audio input source to CD by simply pressing the input selector buttons on the remote.
3. Now “CD” has been selected as the audio input source and “VCR1” as the video input source.
Notes:
•If you change the input source during recording, you will record the signals from the newly selected input source.
•You cannot record the surround effects.
•Digital input signals are only output to the digital outputs. There is no conversion from digital to analog .
When connecting CD players and other digital components, do not connect only the digital terminals, but the analog ones as well.
4.
SURROUND
DIGITAL
1.
4.
2.
TV | VCR1 | DSS/VCR2 | DVD |
TUNER | CD | TAPE | CDR/MD |
| AUX1 | AMP |
|
TV |
|
| MAIN |
VOL. | SLEEP | MUTE | VOL. |
OSD |
| MENU | |
| ENTER |
| |
SET UP/ | MENU OFF |
| |
T.TONE |
|
| |
PURE DIRECT | AUTO |
| DTS |
| 1 | 2 | 3 |
NIGHT | CSII | EX/ES | VIRTUAL |
| 4 | 5 | 6 |
DISPLAY | STEREO | 7.1CH IN |
7 8 9
CLEAR MEMO A/D
0
CHANNEL/SKIP
1. Select a desired Video source to decide the routed video signal to the Monitor Outputs .
2. Press the 7.1 CH INPUT button on the front panel or press 7.1 CH IN on the remote to switch the 7.1 channel input.
28