CDA DC730 manual Installation C By Using Housing Unit figs. 37, 38

28

Installation "C" By Using Housing Unit (figs. 37, 38, 39)

•Remove the single oven shelf, if fitted, as indicated in figure 37.

•Remove the upper cross member support as indicated in figure 38.

•Cut the bottom of the housing as indicated in figure 38.

•Screw oven base housing to adjoining cabinetry by suitable screws (not supplied) as indicated in figure 39.

•Check the position of the cabinet legs to ensure the cut-out does not interfere with the legs support.

Otherwise the cabinet may have to be removed as in INSTALLATION TYPE "B".

•Mount the 2 (two) metal supports “B” (supplied with the appliance in a separate kit) as indicated in Figs. 39).

•Build in the double oven making it slide on the metal supports “B”.