Changing the Light
DO NOT CHANGE THE LIGHT BULB IMMEDIATELY AFTER USE AS THE BULB WILL BE HOT. ALLOW IT TO COOL BEFORE REMOVING IT.
Using a flat blade screwdriver, carefully prise off the lamp cover as shown in figure
5.Remove the bulb and replace with a 12V 20W halogen light bulb. Finally, replace the light bulb cover.
Do not touch bulbs or adjacent areas during or straight after prolonged use of the lights.
The light is designed for use during cooking and not for general room illumination. Extended use of the light can reduce the life span of the bulb.
Bulb replacement is not covered by the guarantee.
Only use bulbs recommended for your extractor. Do not fit bulbs of a higher power rating.
Bulbs of a lower power rating may be adequate for use, generally last longer and use less energy.
C |
D |
Fig. 5 |
4
