Care and maintenance
Always disconnect the appliance from the power before any cleaning or maintenance.
As the icemaker has a stainless steel or enamel surface, you should use a nonabrasive cleaner. Any abrasive cleaner (including Cif) will scratch the surface and could erase the control panel markings. Stainless steel can be effectively cleaned by simply using a dilute solution of water and mild detergent and drying to a shine with a clean cloth.
Proprietary stainless steel cleaners are available. We recommend the CDA
You should remove and clean regularly the ice compartment drawer and both sections of the drip tray.
Once cleaning is complete, reconnect the mains power supply.
If the appliance is not to be used for prolonged periods of time, you should empty, clean thoroughly and turn off both the electricity and water supply.
To empty the icemaker, follow the steps below:
1.Press the 
button
2.Empty the ice drawer
3.Press the 
,
and 
buttons simultaneously.
4.The display will show ICE OFF WATER EMPTY for approximately five minutes until the cycle is complete.
IMPORTANT:
Steam cleaners must not be used when cleaning this appliance.
Ensure that all parts are correctly replaced after cleaning before attempting to use the icemaker.
You should replace the water filter every six months. Replacement filters are available from the CDA Sales Team.
5
